約 3,676,852 件
https://w.atwiki.jp/neteng/pages/34.html
# Global Postfix configuration file. This file lists only a subset # of all parameters. For the syntax, and for a complete parameter # list, see the postconf(5) manual page (command "man 5 postconf"). # # For common configuration examples, see BASIC_CONFIGURATION_README # and STANDARD_CONFIGURATION_README. To find these documents, use # the command "postconf html_directory readme_directory", or go to # http //www.postfix.org/. # # For best results, change no more than 2-3 parameters at a time, # and test if Postfix still works after every change. # SOFT BOUNCE # # The soft_bounce parameter provides a limited safety net for # testing. When soft_bounce is enabled, mail will remain queued that # would otherwise bounce. This parameter disables locally-generated # bounces, and prevents the SMTP server from rejecting mail permanently # (by changing 5xx replies into 4xx replies). However, soft_bounce # is no cure for address rewriting mistakes or mail routing mistakes. # #soft_bounce = no # LOCAL PATHNAME INFORMATION # # The queue_directory specifies the location of the Postfix queue. # This is also the root directory of Postfix daemons that run chrooted. # See the files in examples/chroot-setup for setting up Postfix chroot # environments on different UNIX systems. # queue_directory = /var/spool/postfix # The command_directory parameter specifies the location of all # postXXX commands. # command_directory = /usr/sbin # The daemon_directory parameter specifies the location of all Postfix # daemon programs (i.e. programs listed in the master.cf file). This # directory must be owned by root. # daemon_directory = /usr/libexec/postfix # QUEUE AND PROCESS OWNERSHIP # # The mail_owner parameter specifies the owner of the Postfix queue # and of most Postfix daemon processes. Specify the name of a user # account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS # AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In # particular, don t specify nobody or daemon. PLEASE USE A DEDICATED # USER. # mail_owner = postfix # The default_privs parameter specifies the default rights used by # the local delivery agent for delivery to external file or command. # These rights are used in the absence of a recipient user context. # DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER. # #default_privs = nobody # INTERNET HOST AND DOMAIN NAMES # # The myhostname parameter specifies the internet hostname of this # mail system. The default is to use the fully-qualified domain name # from gethostname(). $myhostname is used as a default value for many # other configuration parameters. # #myhostname = host.domain.tld myhostname = neteng18.dom06.localdomain # The mydomain parameter specifies the local internet domain name. # The default is to use $myhostname minus the first component. # $mydomain is used as a default value for many other configuration # parameters. # mydomain = dom06.localdomain # SENDING MAIL # # The myorigin parameter specifies the domain that locally-posted # mail appears to come from. The default is to append $myhostname, # which is fine for small sites. If you run a domain with multiple # machines, you should (1) change this to $mydomain and (2) set up # a domain-wide alias database that aliases each user to # user@that.users.mailhost. # # For the sake of consistency between sender and recipient addresses, # myorigin also specifies the default domain name that is appended # to recipient addresses that have no @domain part. # #myorigin = $myhostname myorigin = $mydomain # RECEIVING MAIL # The inet_interfaces parameter specifies the network interface # addresses that this mail system receives mail on. By default, # the software claims all active interfaces on the machine. The # parameter also controls delivery of mail to user@[ip.address]. # # See also the proxy_interfaces parameter, for network addresses that # are forwarded to us via a proxy or network address translator. # # Note you need to stop/start Postfix when this parameter changes. # inet_interfaces = all #inet_interfaces = $myhostname #inet_interfaces = $myhostname, localhost #inet_interfaces = localhost # The proxy_interfaces parameter specifies the network interface # addresses that this mail system receives mail on by way of a # proxy or network address translation unit. This setting extends # the address list specified with the inet_interfaces parameter. # # You must specify your proxy/NAT addresses when your system is a # backup MX host for other domains, otherwise mail delivery loops # will happen when the primary MX host is down. # #proxy_interfaces = #proxy_interfaces = 1.2.3.4 # The mydestination parameter specifies the list of domains that this # machine considers itself the final destination for. # # These domains are routed to the delivery agent specified with the # local_transport parameter setting. By default, that is the UNIX # compatible delivery agent that lookups all recipients in /etc/passwd # and /etc/aliases or their equivalent. # # The default is $myhostname + localhost.$mydomain. On a mail domain # gateway, you should also include $mydomain. # # Do not specify the names of virtual domains - those domains are # specified elsewhere (see VIRTUAL_README). # # Do not specify the names of domains that this machine is backup MX # host for. Specify those names via the relay_domains settings for # the SMTP server, or use permit_mx_backup if you are lazy (see # STANDARD_CONFIGURATION_README). # # The local machine is always the final destination for mail addressed # to user@[the.net.work.address] of an interface that the mail system # receives mail on (see the inet_interfaces parameter). # # Specify a list of host or domain names, /file/name or type table # patterns, separated by commas and/or whitespace. A /file/name # pattern is replaced by its contents; a type table is matched when # a name matches a lookup key (the right-hand side is ignored). # Continue long lines by starting the next line with whitespace. # # See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS". # #mydestination = $myhostname, localhost.$mydomain, localhost mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain #mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain, #mail.$mydomain, www.$mydomain, ftp.$mydomain # REJECTING MAIL FOR UNKNOWN LOCAL USERS # # The local_recipient_maps parameter specifies optional lookup tables # with all names or addresses of users that are local with respect # to $mydestination, $inet_interfaces or $proxy_interfaces. # # If this parameter is defined, then the SMTP server will reject # mail for unknown local users. This parameter is defined by default. # # To turn off local recipient checking in the SMTP server, specify # local_recipient_maps = (i.e. empty). # # The default setting assumes that you use the default Postfix local # delivery agent for local delivery. You need to update the # local_recipient_maps setting if # # - You define $mydestination domain recipients in files other than # /etc/passwd, /etc/aliases, or the $virtual_alias_maps files. # For example, you define $mydestination domain recipients in # the $virtual_mailbox_maps files. # # - You redefine the local delivery agent in master.cf. # # - You redefine the "local_transport" setting in main.cf. # # - You use the "luser_relay", "mailbox_transport", or "fallback_transport" # feature of the Postfix local delivery agent (see local(8)). # # Details are described in the LOCAL_RECIPIENT_README file. # # Beware if the Postfix SMTP server runs chrooted, you probably have # to access the passwd file via the proxymap service, in order to # overcome chroot restrictions. The alternative, having a copy of # the system passwd file in the chroot jail is just not practical. # # The right-hand side of the lookup tables is conveniently ignored. # In the left-hand side, specify a bare username, an @domain.tld # wild-card, or specify a user@domain.tld address. # #local_recipient_maps = unix passwd.byname $alias_maps #local_recipient_maps = proxy unix passwd.byname $alias_maps #local_recipient_maps = # The unknown_local_recipient_reject_code specifies the SMTP server # response code when a recipient domain matches $mydestination or # ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty # and the recipient address or address local-part is not found. # # The default setting is 550 (reject mail) but it is safer to start # with 450 (try again later) until you are certain that your # local_recipient_maps settings are OK. # unknown_local_recipient_reject_code = 550 # TRUST AND RELAY CONTROL # The mynetworks parameter specifies the list of "trusted" SMTP # clients that have more privileges than "strangers". # # In particular, "trusted" SMTP clients are allowed to relay mail # through Postfix. See the smtpd_recipient_restrictions parameter # in postconf(5). # # You can specify the list of "trusted" network addresses by hand # or you can let Postfix do it for you (which is the default). # # By default (mynetworks_style = subnet), Postfix "trusts" SMTP # clients in the same IP subnetworks as the local machine. # On Linux, this does works correctly only with interfaces specified # with the "ifconfig" command. # # Specify "mynetworks_style = class" when Postfix should "trust" SMTP # clients in the same IP class A/B/C networks as the local machine. # Don t do this with a dialup site - it would cause Postfix to "trust" # your entire provider s network. Instead, specify an explicit # mynetworks list by hand, as described below. # # Specify "mynetworks_style = host" when Postfix should "trust" # only the local machine. # #mynetworks_style = class #mynetworks_style = subnet #mynetworks_style = host # Alternatively, you can specify the mynetworks list by hand, in # which case Postfix ignores the mynetworks_style setting. # # Specify an explicit list of network/netmask patterns, where the # mask specifies the number of bits in the network part of a host # address. # # You can also specify the absolute pathname of a pattern file instead # of listing the patterns here. Specify type table for table-based lookups # (the value on the table right-hand side is not used). # mynetworks = 192.168.128.208/28, 127.0.0.0/8, [fd00 0]/64, [ 1] #mynetworks = $config_directory/mynetworks #mynetworks = hash /etc/postfix/network_table # The relay_domains parameter restricts what destinations this system will # relay mail to. See the smtpd_recipient_restrictions description in # postconf(5) for detailed information. # # By default, Postfix relays mail # - from "trusted" clients (IP address matches $mynetworks) to any destination, # - from "untrusted" clients to destinations that match $relay_domains or # subdomains thereof, except addresses with sender-specified routing. # The default relay_domains value is $mydestination. # # In addition to the above, the Postfix SMTP server by default accepts mail # that Postfix is final destination for # - destinations that match $inet_interfaces or $proxy_interfaces, # - destinations that match $mydestination # - destinations that match $virtual_alias_domains, # - destinations that match $virtual_mailbox_domains. # These destinations do not need to be listed in $relay_domains. # # Specify a list of hosts or domains, /file/name patterns or type name # lookup tables, separated by commas and/or whitespace. Continue # long lines by starting the next line with whitespace. A file name # is replaced by its contents; a type name table is matched when a # (parent) domain appears as lookup key. # # NOTE Postfix will not automatically forward mail for domains that # list this system as their primary or backup MX host. See the # permit_mx_backup restriction description in postconf(5). # #relay_domains = $mydestination # INTERNET OR INTRANET # The relayhost parameter specifies the default host to send mail to # when no entry is matched in the optional transport(5) table. When # no relayhost is given, mail is routed directly to the destination. # # On an intranet, specify the organizational domain name. If your # internal DNS uses no MX records, specify the name of the intranet # gateway host instead. # # In the case of SMTP, specify a domain, host, host port, [host] port, # [address] or [address] port; the form [host] turns off MX lookups. # # If you re connected via UUCP, see also the default_transport parameter. # #relayhost = $mydomain #relayhost = [gateway.my.domain] #relayhost = [mailserver.isp.tld] #relayhost = uucphost #relayhost = [an.ip.add.ress] # REJECTING UNKNOWN RELAY USERS # # The relay_recipient_maps parameter specifies optional lookup tables # with all addresses in the domains that match $relay_domains. # # If this parameter is defined, then the SMTP server will reject # mail for unknown relay users. This feature is off by default. # # The right-hand side of the lookup tables is conveniently ignored. # In the left-hand side, specify an @domain.tld wild-card, or specify # a user@domain.tld address. # #relay_recipient_maps = hash /etc/postfix/relay_recipients # INPUT RATE CONTROL # # The in_flow_delay configuration parameter implements mail input # flow control. This feature is turned on by default, although it # still needs further development (it s disabled on SCO UNIX due # to an SCO bug). # # A Postfix process will pause for $in_flow_delay seconds before # accepting a new message, when the message arrival rate exceeds the # message delivery rate. With the default 100 SMTP server process # limit, this limits the mail inflow to 100 messages a second more # than the number of messages delivered per second. # # Specify 0 to disable the feature. Valid delays are 0..10. # #in_flow_delay = 1s # ADDRESS REWRITING # # The ADDRESS_REWRITING_README document gives information about # address masquerading or other forms of address rewriting including # username- Firstname.Lastname mapping. # ADDRESS REDIRECTION (VIRTUAL DOMAIN) # # The VIRTUAL_README document gives information about the many forms # of domain hosting that Postfix supports. # "USER HAS MOVED" BOUNCE MESSAGES # # See the discussion in the ADDRESS_REWRITING_README document. # TRANSPORT MAP # # See the discussion in the ADDRESS_REWRITING_README document. # ALIAS DATABASE # # The alias_maps parameter specifies the list of alias databases used # by the local delivery agent. The default list is system dependent. # # On systems with NIS, the default is to search the local alias # database, then the NIS alias database. See aliases(5) for syntax # details. # # If you change the alias database, run "postalias /etc/aliases" (or # wherever your system stores the mail alias file), or simply run # "newaliases" to build the necessary DBM or DB file. # # It will take a minute or so before changes become visible. Use # "postfix reload" to eliminate the delay. # #alias_maps = dbm /etc/aliases alias_maps = hash /etc/aliases #alias_maps = hash /etc/aliases, nis mail.aliases #alias_maps = netinfo /aliases # The alias_database parameter specifies the alias database(s) that # are built with "newaliases" or "sendmail -bi". This is a separate # configuration parameter, because alias_maps (see above) may specify # tables that are not necessarily all under control by Postfix. # #alias_database = dbm /etc/aliases #alias_database = dbm /etc/mail/aliases alias_database = hash /etc/aliases #alias_database = hash /etc/aliases, hash /opt/majordomo/aliases # ADDRESS EXTENSIONS (e.g., user+foo) # # The recipient_delimiter parameter specifies the separator between # user names and address extensions (user+foo). See canonical(5), # local(8), relocated(5) and virtual(5) for the effects this has on # aliases, canonical, virtual, relocated and .forward file lookups. # Basically, the software tries user+foo and .forward+foo before # trying user and .forward. # #recipient_delimiter = + # DELIVERY TO MAILBOX # # The home_mailbox parameter specifies the optional pathname of a # mailbox file relative to a user s home directory. The default # mailbox file is /var/spool/mail/user or /var/mail/user. Specify # "Maildir/" for qmail-style delivery (the / is required). # #home_mailbox = Mailbox #home_mailbox = Maildir/ # The mail_spool_directory parameter specifies the directory where # UNIX-style mailboxes are kept. The default setting depends on the # system type. # #mail_spool_directory = /var/mail mail_spool_directory = /var/spool/mail # The mailbox_command parameter specifies the optional external # command to use instead of mailbox delivery. The command is run as # the recipient with proper HOME, SHELL and LOGNAME environment settings. # Exception delivery for root is done as $default_user. # # Other environment variables of interest USER (recipient username), # EXTENSION (address extension), DOMAIN (domain part of address), # and LOCAL (the address localpart). # # Unlike other Postfix configuration parameters, the mailbox_command # parameter is not subjected to $parameter substitutions. This is to # make it easier to specify shell syntax (see example below). # # Avoid shell meta characters because they will force Postfix to run # an expensive shell process. Procmail alone is expensive enough. # # IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN # ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER. # #mailbox_command = /some/where/procmail #mailbox_command = /some/where/procmail -a "$EXTENSION" # The mailbox_transport specifies the optional transport in master.cf # to use after processing aliases and .forward files. This parameter # has precedence over the mailbox_command, fallback_transport and # luser_relay parameters. # # Specify a string of the form transport nexthop, where transport is # the name of a mail delivery transport defined in master.cf. The # nexthop part is optional. For more details see the sample transport # configuration file. # # NOTE if you use this feature for accounts not in the UNIX password # file, then you must update the "local_recipient_maps" setting in # the main.cf file, otherwise the SMTP server will reject mail for # non-UNIX accounts with "User unknown in local recipient table". # #mailbox_transport = lmtp unix /var/lib/imap/socket/lmtp # If using the cyrus-imapd IMAP server deliver local mail to the IMAP # server using LMTP (Local Mail Transport Protocol), this is prefered # over the older cyrus deliver program by setting the # mailbox_transport as below # # mailbox_transport = lmtp unix /var/lib/imap/socket/lmtp # # The efficiency of LMTP delivery for cyrus-imapd can be enhanced via # these settings. # # local_destination_recipient_limit = 300 # local_destination_concurrency_limit = 5 # # Of course you should adjust these settings as appropriate for the # capacity of the hardware you are using. The recipient limit setting # can be used to take advantage of the single instance message store # capability of Cyrus. The concurrency limit can be used to control # how many simultaneous LMTP sessions will be permitted to the Cyrus # message store. # # To use the old cyrus deliver program you have to set #mailbox_transport = cyrus # The fallback_transport specifies the optional transport in master.cf # to use for recipients that are not found in the UNIX passwd database. # This parameter has precedence over the luser_relay parameter. # # Specify a string of the form transport nexthop, where transport is # the name of a mail delivery transport defined in master.cf. The # nexthop part is optional. For more details see the sample transport # configuration file. # # NOTE if you use this feature for accounts not in the UNIX password # file, then you must update the "local_recipient_maps" setting in # the main.cf file, otherwise the SMTP server will reject mail for # non-UNIX accounts with "User unknown in local recipient table". # #fallback_transport = lmtp unix /var/lib/imap/socket/lmtp #fallback_transport = # The luser_relay parameter specifies an optional destination address # for unknown recipients. By default, mail for unknown@$mydestination, # unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned # as undeliverable. # # The following expansions are done on luser_relay $user (recipient # username), $shell (recipient shell), $home (recipient home directory), # $recipient (full recipient address), $extension (recipient address # extension), $domain (recipient domain), $local (entire recipient # localpart), $recipient_delimiter. Specify ${name?value} or # ${name value} to expand value only when $name does (does not) exist. # # luser_relay works only for the default Postfix local delivery agent. # # NOTE if you use this feature for accounts not in the UNIX password # file, then you must specify "local_recipient_maps =" (i.e. empty) in # the main.cf file, otherwise the SMTP server will reject mail for # non-UNIX accounts with "User unknown in local recipient table". # #luser_relay = $user@other.host #luser_relay = $local@other.host #luser_relay = admin+$local # JUNK MAIL CONTROLS # # The controls listed here are only a very small subset. The file # SMTPD_ACCESS_README provides an overview. # The header_checks parameter specifies an optional table with patterns # that each logical message header is matched against, including # headers that span multiple physical lines. # # By default, these patterns also apply to MIME headers and to the # headers of attached messages. With older Postfix versions, MIME and # attached message headers were treated as body text. # # For details, see "man header_checks". # #header_checks = regexp /etc/postfix/header_checks # FAST ETRN SERVICE # # Postfix maintains per-destination logfiles with information about # deferred mail, so that mail can be flushed quickly with the SMTP # "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld". # See the ETRN_README document for a detailed description. # # The fast_flush_domains parameter controls what destinations are # eligible for this service. By default, they are all domains that # this server is willing to relay mail to. # #fast_flush_domains = $relay_domains # SHOW SOFTWARE VERSION OR NOT # # The smtpd_banner parameter specifies the text that follows the 220 # code in the SMTP server s greeting banner. Some people like to see # the mail version advertised. By default, Postfix shows no version. # # You MUST specify $myhostname at the start of the text. That is an # RFC requirement. Postfix itself does not care. # #smtpd_banner = $myhostname ESMTP $mail_name #smtpd_banner = $myhostname ESMTP $mail_name ($mail_version) # PARALLEL DELIVERY TO THE SAME DESTINATION # # How many parallel deliveries to the same user or domain? With local # delivery, it does not make sense to do massively parallel delivery # to the same user, because mailbox updates must happen sequentially, # and expensive pipelines in .forward files can cause disasters when # too many are run at the same time. With SMTP deliveries, 10 # simultaneous connections to the same domain could be sufficient to # raise eyebrows. # # Each message delivery transport has its XXX_destination_concurrency_limit # parameter. The default is $default_destination_concurrency_limit for # most delivery transports. For the local delivery agent the default is 2. #local_destination_concurrency_limit = 2 #default_destination_concurrency_limit = 20 # DEBUGGING CONTROL # # The debug_peer_level parameter specifies the increment in verbose # logging level when an SMTP client or server host name or address # matches a pattern in the debug_peer_list parameter. # debug_peer_level = 2 # The debug_peer_list parameter specifies an optional list of domain # or network patterns, /file/name patterns or type name tables. When # an SMTP client or server host name or address matches a pattern, # increase the verbose logging level by the amount specified in the # debug_peer_level parameter. # #debug_peer_list = 127.0.0.1 #debug_peer_list = some.domain # The debugger_command specifies the external command that is executed # when a Postfix daemon program is run with the -D option. # # Use "command .. sleep 5" so that the debugger can attach before # the process marches on. If you use an X-based debugger, be sure to # set up your XAUTHORITY environment variable before starting Postfix. # debugger_command = PATH=/bin /usr/bin /usr/local/bin /usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id sleep 5 # If you can t use X, use this to capture the call stack when a # daemon crashes. The result is in a file in the configuration # directory, and is named after the process name and the process ID. # # debugger_command = #PATH=/bin /usr/bin /usr/local/bin; export PATH; (echo cont; #echo where) | gdb $daemon_directory/$process_name $process_id 2 1 # $config_directory/$process_name.$process_id.log sleep 5 # # Another possibility is to run gdb under a detached screen session. # To attach to the screen sesssion, su root and run "screen -r # id_string " where id_string uniquely matches one of the detached # sessions (from "screen -list"). # # debugger_command = #PATH=/bin /usr/bin /sbin /usr/sbin; export PATH; screen #-dmS $process_name gdb $daemon_directory/$process_name #$process_id sleep 1 # INSTALL-TIME CONFIGURATION INFORMATION # # The following parameters are used when installing a new Postfix version. # # sendmail_path The full pathname of the Postfix sendmail command. # This is the Sendmail-compatible mail posting interface. # sendmail_path = /usr/sbin/sendmail.postfix # newaliases_path The full pathname of the Postfix newaliases command. # This is the Sendmail-compatible command to build alias databases. # newaliases_path = /usr/bin/newaliases.postfix # mailq_path The full pathname of the Postfix mailq command. This # is the Sendmail-compatible mail queue listing command. # mailq_path = /usr/bin/mailq.postfix # setgid_group The group for mail submission and queue management # commands. This must be a group name with a numerical group ID that # is not shared with other accounts, not even with the Postfix account. # setgid_group = postdrop # html_directory The location of the Postfix HTML documentation. # html_directory = no # manpage_directory The location of the Postfix on-line manual pages. # manpage_directory = /usr/share/man # sample_directory The location of the Postfix sample configuration files. # This parameter is obsolete as of Postfix 2.1. # sample_directory = /usr/share/doc/postfix-2.4.5/samples # readme_directory The location of the Postfix README files. # readme_directory = /usr/share/doc/postfix-2.4.5/README_FILES smtpd_client_restrictions = permit_mynetworks, reject smtpd_sender_restrictions = reject_non_fqdn_sender, reject_unknown_sender_domain, reject_invalid_hostname smtpd_recipient_restrictions = reject_non_fqdn_recipient, reject_unauth_destination, permit_mynetworks smtpd_recipient_limit = 4 message_size_limit = 10000 inet_protocols=all
https://w.atwiki.jp/pfun1355/pages/139.html
メール返信希望の方は、メールアドレスを入力してください。 入力されていない場合はブログでの返信となります。 Your Name Email Address Message
https://w.atwiki.jp/simbelmyne/pages/17.html
Mail Form 管理人宛てのMail Formです。 管理人へのメッセージがありましたらこちらからどうぞ。 名前 メールアドレス 内容
https://w.atwiki.jp/roxvent/pages/15.html
希望の部屋名とパスを明記の上 下記のメールアドレスまでご連絡ください。 roxventあっとhotmail.co.jp （あっとを@に変更してください） 申請用テンプレ 【使用ゲーム】 【希望部屋名】 【希望パスワード】 【その他要望など】
https://w.atwiki.jp/fukinoto/pages/22.html
div style="position relative;width 600px;height 60px;background-image url(http //domains.live.com/OpenSignupImages/OpenMembership600x60.jpg);overflow hidden;" div style="height 100%;width 100%;overflow hidden" table align="left" border="0px" cellpadding="5px" cellspacing="0px" style="table-layout fixed;word-wrap break-word;" tr td width="260px" height="60px" align="center" valign="middle" style="color #ffffff;font 16px Arial" @hira-hira.com のアカウントを無料で登録できます /td /tr /table /div div style="position absolute;border 1px solid #ffffff;width 90px;left 270px;bottom 18px;" div style="border 1px solid #1F59A5;" div style="border 1px solid #ffffff;background-image url(http //domains.live.com/OpenSignupImages/OpenButtonBackground.gif);padding 1px 0px 1px 0px;margin 0px;text-align center;" a href="https //domains.live.com/members/signup.aspx?domain=hira-hira.com" style="font bold 12px Arial,Helvetica,sans-serif;color #092076;text-decoration none;" アカウント作成 /a /div /div /div div style="position absolute;border 1px solid #ffffff;width 90px;right 135px;bottom 18px;" div style="border 1px solid #1F59A5;" div style="border 1px solid #ffffff;background-image url(http //domains.live.com/OpenSignupImages/OpenButtonBackground.gif);padding 1px 0px 1px 0px;margin 0px;text-align center;" a href="http //mail.live.com" style="font bold 12px Arial,Helvetica,sans-serif;color #092076;text-decoration none;" メールの確認 /a /div /div /div /div
https://w.atwiki.jp/sdvx/pages/2286.html
Pure Evil/ kors k ?plugin=ref serial=1198?plugin=ref serial=1198?plugin=ref serial=1198 Lv CHAIN 譜面属性 BPM TIME Version Genre Illustrator Effect NOVICE 05 0659 190 II29 SDVXオリジナル AO-NI feat.M-TC PHQUASE ADVANCED 12 1084 EXHAUST 17 1604 Lv変更[EXH] 15→17(2016/12/21) +難易度投票 NOVICE 選択肢 投票数 投票 詐称 0 強 1 中 1 弱 0 逆詐称 0 ADVANCED 選択肢 投票数 投票 詐称 0 強 4 中 2 弱 2 逆詐称 1 EXHAUST 選択肢 投票数 投票 詐称 12 強 23 中 13 弱 4 逆詐称 2 攻略・解説 譜面・楽曲の攻略についてはこちらへどうぞ 見辛さ解消の為に改行や文頭の編集、不適切なコメントを削除することがあります [EXH]16分直角の直前のFXチップは出張で取ると安定して直角が取れます。サビは基本形が「表拍両FX」「裏拍BT」だが、たまに入る裏拍のFXで崩さないように注意。その後は最後まで様々な片手処理が続くためとにかく気が抜けない譜面。 -- 名無しさん (2014-03-24 05 14 42) [ bgcolor(#faa){EXH}] 別の譜面ではなかなか登場しない配置が多く繰り返しも少ないという、曲調に反して癖の強い譜面。十分に地力を上げた後、繰り返してプレイして慣れるしかないだろう。 -- 名無しさん (2015-04-25 09 49 26) 名前 コメント ※文頭に[ bgcolor(#aaf){NOV}]、[ bgcolor(#ffa){ADV}]、[ bgcolor(#faa){EXH}]をコピー ペーストすると見やすくなります コメント 楽曲やイラストなどのコメントについてはこちらへどうぞ 前半楽勝でチョロいかと思ったら後半手が止まった -- (名無しさん) 2014-03-24 23 20 52 大回転と思ったら回転キャンセルでした -- (名無しさん) 2014-03-27 02 45 24 チップ混じりの構成が厳しくてすっごい苦手 -- (名無しさん) 2014-03-29 02 30 15 一度クリア出来ると安定する。 -- (名無しさん) 2014-04-26 18 25 54 それぞれ数回やってクロス11%、黒白12%、QR20%、これ0%だった。特にサビ部分に来る同時の練習曲が欲しい…。 -- (名無しさん) 2014-05-06 17 47 01 ↑その感じだとサビの鍵盤云々ではなく、単なる地力不足。Lv14のスコア上げを一通りするべし。 -- (名無しさん) 2014-06-12 11 15 23 Virtual Sunriseは天国、そしてこの曲は地獄 -- (名無しさん) 2014-06-19 12 39 11 これはCから上がる気がしない。サビがくそ過ぎだろ、地力ないのかな... -- (名無しさん) 2014-07-02 15 35 03 Cは単純に地力不足。初見でサビ以降ほぼ全部落としてもBだったし。他で頑張ってもう一度戻ってくるべし -- (名無しさん) 2014-07-02 18 52 14 B -- (名無しさん) 2014-07-12 18 38 37 ６回目でクリアできたがサビ部分苦手すぎる -- (名無しさん) 2014-07-12 18 39 05 ↑7だが他no15()でFX・BT交互練習したらなんとかクリアできた…。ちなみにクロスクリアより後だった。14の -- (名無しさん) 2014-07-13 20 45 11 ↑いろいろミスった。最初の()の中は(主に信仰)。14埋めはしてもあまり意味なく感じた。ただ回転キャンセルで50%くらいないと厳しいと思う。 -- (名無しさん) 2014-07-13 20 46 28 FX･BTの地帯でニアるせいで鳥が取れない… -- (名無しさん) 2014-07-16 09 28 21 クリア目的ならサビの始めはFXとBT分業もありじゃね？裏拍FXは1回しか無いしそこは捨てで -- (名無しさん) 2014-07-22 03 44 27 これ金枠麗華でもVerse IV解禁するころには普通にクリアできるから、このゲームは個人差というのも含めても、やっぱりほぼ覚えゲーだと思う -- (名無しさん) 2015-02-07 01 40 24 前半で稼いで、FXBT地帯は何も考えずに反射神経に任せたらそこまでゲージ減らずにクリアできた -- (名無しさん) 2015-07-12 13 26 22 サビはFXLR→BTABCD全押しの繰り返しでも取れるからどうしてもって人はこれで クリアだけなら難しい部類ではないハズ -- (名無しさん) 2015-07-21 12 04 26 ↑ BT全押しが早ニアになってるおかげで、エラーハマりを免れてるだけかと。 BT全押しで光っててもエラーハマりしてないことを確認した？ -- (名無しさん) 2015-07-22 12 44 17 ↑はよく分からないんだけど、クリア狙いとかならFXLR→BT全押しで行けば大分楽になる -- (名無しさん) 2018-06-20 16 41 38 名前 コメント すべてのコメントを見る
https://w.atwiki.jp/yurina0106/pages/2899.html
タグ 感動 曲名P DAMにて配信中 歌 AKI 作詞 KOTOKO 作曲 高瀬一矢 作品 Pure Heart ~世界で一番アナタが好き~OP 詩月カオリver UGAにて配信中
https://w.atwiki.jp/818hr/pages/311.html
ピュアメール PUREMAIL ピュアメール PUREMAIL オーバーフロー 00/08/25 メールを利用したネット恋愛アドベンチャーゲーム／ＨＲゲーマーから大きな支持を集め るオーバーフローの第２段。一見純愛、でも実は鬼畜、しかもＨＲ！という展開が大好評。 ----------------------------------------------------------------- ネタバレ／ 青葉衣里→嫌いな彼と別れるために、主人公と付き合っている振りをしてラブ ホテルへ。そのままレイプ＞中田氏。「赤ちゃん出来ちゃう」発言あり。バッドエンドル ートなんで、その後は不明（笑／関端りん→エンド直前のＨで中田氏すると、妊娠エンド に。でも、小学生なんですけど・・・（＾＾；／澤永美紀→主人公の奴隷になった碧の前 で、主人公にレイプされて中田氏。碧（女王様モード）の下僕になった主人公にレイプさ れて中田氏。の２パターンがあって、どちらも妊娠エンドになります ----------------------------------------------------------------- （名無しさん＠２ちゃんエロゲ板）煩雑なフラグ立てに、そこはかとなく散りばめられた Bug達、それを差し置いても鬼畜度、中田氏度において螺旋回廊を上回り、尚且つ膨大 なフラグ立てにおける会話シーンが遺憾無くキャラを立たせつつ、純愛路線も及第点の水 準を保ち（ボリウムはチト足りないが）OPのアニメーションのクオリティーは上々、ま たHRゲーム目的のプレーヤの要求にも十二分に対応できる。総括しても実にエロゲーら しいエロゲー、その名も「PURE MAIL」 僕はこの20世紀最後の年に発売され たこの一作にルネッサンス オブ エロゲーの称号を送りたいがいかがであろうか！？ 難点としては、パケ買いでそうとは知らずに手にしてしまった鬼畜系が苦手な人達の不運 といったところか（ｗ ----------------------------------------------------------------- （名無しさん＠２ちゃんエロゲ板） ネタバレ／ 澤永美紀か？純愛ルートで中田氏されて（叔母風呂にしてはこのシーンのみテ キスト濃い目）奴隷ルートでも友人の奴隷ルートでも麗婦中田氏ＨＲさせられた上に、Ｏ ＶＡにまで出張させられて麗婦の上また中田氏されるとは・・・しかも浴衣・・・ ----------------------------------------------------------------- （名無しさん＠２ちゃんエロゲ板） ピュ○メールの妊娠幼女はその後どうなったんだろう。サイドストーリーとかないんでつか？ ----------------------------------------------------------------- （名無しさん＠２ちゃんエロゲ板） ファンディスクで、後日談があったけど、会話のみで絵ナシ。女子校生になって、小学生 の娘連れて押し掛けてきたものの、娘のスカートめくってるところを見つかって大激怒っ て話だったハズ。 ----------------------------------------------------------------- （名無しさん＠２ちゃんエロゲ板） 「オーバーフロー・ぷれじゃーBOX」の「その後のピュアメール」だね。会話っていう か、主人公の友人へのあらましの告白のみ。アレはどのヒロインも「いやぁぁぁ(;´Д `)」って後日談揃いだったからなｗ 嫌がらせはあの社長のエネルギー源みたいだし…ｗ ----------------------------------------------------------------- （名無しさん＠２ちゃんエロゲ板）あそこで一番いいのはピュアメールだよ。いまでも。 たしか当時のエロゲ板ベストゲースレで年間総合３位だったかなあ。普通のギャルゲ萌え ゲにちょっと飽きた、一周しちゃったオタのために、それら普通のギャルゲの裏的タイト ルとして作られたエロゲ。藤崎詩織的メインヒロインが「で、あんた同性の友達少ないよ ね」と言われたりとかｗ、クラスを扇動して主人公を無視させる厨房年代らしいひどい面 を見せたりとか。妹が、全然オタの理想像とかけはなれた、生っぽくてウザい奴だとか。 それを、王道ギャルゲ作ってたとこが、王道ギャルゲ並の力入れて作ったってのが当時面 白かったわけ。主題歌つき高クオリティOPアニメでいかにも王道ヒロインぽく盛り上げ たヒロインに、メール調教してうんこさせたり、女王様化させたり、普通はしないｗ あ そこらしい、孕ませネタや幼女にいたずらの鬼畜ネタも当然あるしな。
https://w.atwiki.jp/gift/pages/4.html
MAIL TO 各種お問い合わせや、もしものお仕事は下記アドレスまでお願いします。 迷惑メール防止のため表記が画像になっていますのでご注意ください。 メールはお返事が遅れる、もしくはお返事できない場合がございます。ちゃんと目は通してますが･･･申し訳ないです。なので返信が遅くてもかまわないという、広い心の方のみメールしてください。感想など頂けると、すごくすごく嬉しいのですが、なにぶん遅筆なためメールを書くのに多大なる時間がかかるものでして･･･申し訳ありません。
https://w.atwiki.jp/u-81/pages/20.html
CЯIB GЯANDSLAM では 出演者を募集しています また ご意見 その他もこちらへ・・・ mailto xLYCAONx@hotmail.co.jp